ROHDE & SCHWARZ SMP03 CALIBRATION and ROHDE & SCHWARZ SMP03 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ SMP03 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   ROHDE & SCHWARZ SMP03 (1035.5005.03)   Description / Specification:   Spec Sheet 
ROHDE & SCHWARZ SMP03 27 GHz Microwave Signal Generator

The R&S SMP03 (1035.5005.03) 27 GHz Microwave Signal Generator has been designed for high output power with AM, FM and optional phase modulation. High spectral purity is ensured by the use of YIG oscillators – up to 20 GHz without any frequency multiplying. The crystal reference built-in as standard ensures an accurate and low-drift output frequency. The SMP03 has extremely low SSB phase noise of <–105 dBc/Hz at 10 GHz (10 kHz from carrier) as well as nonharmonics of <–60/54 dBc up to/above 20 GHz. Functions qualifying the SMP03 for EMC applications include the trigger facility for step-by-step sweeping, marker outputs and, above all, the extension of the frequency range to 10 MHz (option SMP-B11). Specifications. Frequency Range: 2 GHz to 27 GHz. Resolution: 0.1 Hz. Setting time (to within <1x10^–6) after IEC-/IEEE-bus delimiter: <(11 ms + 5 ms/GHz). Phase offset: adjustable in 1° steps. Harmonics f <1.8 GHz: <–30 dBc (<+3 dBm). Nonharmonics at >10 kHz from carrier f <2 GHz: <–60 dBc typ. Maximum level: >+12 dBm (10MHz to <2GHz), >+10 dBm (2 GHz to <18 GHz), >+6 dBm (18 GHz to 20 GHz), >+13 dBm (20 GHz to 27 GHz). Resolution: 0.1 dB or 0.01 dB. Output impedance: 50 ohm. Remote control: IEC625 (IEEE488). Options. SMP-B11 (1036.6240.02), Frequency Extension 0.01 GHz to 2 GHz. SMP-B12 (1036.5750.03), Pulse Modulator 2 GHz to 27 GHz. SMP-B13 (1036.7147.02), 0.01 GHz to 2 GHz. SMP-B14 (1036.7347.02), Pulse Generator. SMP-B15 (036.5250.02), RF Attenuator 27 GHz. SMP-B18 (1036.8920.02), Auxiliary Interface. SMP-B19 (1039.4303.02), Rear Connectors for RF, AF. SMP-B1 (1036.5109.02), OCXO Reference Oscillator. SM-B2 (1036.7947.02), LF Generator. SM-B5 (1036.8489.02), FM/phaseM Modulator.



 

Standard Calibration $665.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ SMP03. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your ROHDE & SCHWARZ SMP03 CALIBRATION and/or ROHDE & SCHWARZ SMP03 27 GHz Microwave Signal Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: